Hello,
I am trying to assign an IP of 192.168.192.2 to a host but it doesn’t seem to work. If i run “ip add” it doesn’t show the static address. The only time the static address shows up is if i also have the dynamically assigned address. Is there something im missing?
Two addresses 192.168.192.148(dynamic), and 192.168.192.2(static)
41: ZTR: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2800 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/ether 2a:85:42:7d:16:9f brd ff:ff:ff:ff:ff:ff
inet 192.168.192.148/24 brd 192.168.192.255 scope global ZTR
valid_lft forever preferred_lft forever
inet 192.168.192.2/24 brd 192.168.192.255 scope global secondary ZTR
valid_lft forever preferred_lft forever
inet6 fe80::2885:42ff:fe7d:169f/64 scope link
valid_lft forever preferred_lft forever
Removed 192.168.192.148(Dynamic)
41: ZTR: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2800 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/ether 2a:85:42:7d:16:9f brd ff:ff:ff:ff:ff:ff
inet6 fe80::2885:42ff:fe7d:169f/64 scope link
valid_lft forever preferred_lft forever