Help Needed: Connecting Ubiquiti Mobile Router to UniFi Dream Machine Pro via ZeroTier

Hi everyone,

I recently learned about ZeroTier and I’m trying to set up a network, but I’m facing some challenges and could use some advice.

Setup Details:

  • Client Network: UniFi Dream Machine Pro behind Starlink CGNAT
  • ZeroTier Network: Successfully created and joined on the UDM-Pro side (amazingly simple)
  • Other End: Ubiquiti Mobile Router (UMR-Industrial) at the gate with a connected camera and smart gate controller

Challenges:

  • The gate controller only needs internet access, but the camera needs to communicate with the UDM-Pro in the house. All traffic can go through the house.
  • The UMR cannot serve a VPN, and there is no CLI available.
  • Ubiquiti support has not responded to my requests for assistance.
  • The UMR is not part of the UniFi family, so site magic won’t work, and without CLI, I can’t get it to join my ZeroTier network.

Question: Does anyone have any ideas on how to get the camera and UDM-Pro to communicate, either inside or outside of ZeroTier? Any alternative solutions or workarounds would be greatly appreciated.

How does the UMR get internet access now? If you have fiber/uW/ethernet running to the gate from your house, it sounds like you just need a L3 switch to set up a Gate Controller VLAN and a Camera VLAN.

Lay out for us the network topology as it’s built now.

Sorry, I forgot for a moment that everyone doesn’t know everything about my particular setup. UMR stands for Ubiquiti Mobile Router. It’s connected via AT&T wireless.

The solution needs to go through AT&T at one end and Starlink at the other.

I’m looking into setting up a VPS in Oracle Cloud. I should be able to run a wireguard server there and be well within the limits for their free tier. I’m working on that now. I’ll update if it works out favorably.

Here’s the wired portion of the network: