Unable route traffic thru Windows to other network devices

Community Support Windows
1

Hello everyone,

I was able to add a domain controller over ZT, GP is applying good, but I haven’t been able to connect to network devices from network A to devices on network B. I tried all routing possible that I know of then research and I am still unable to send traffic from A to B. network A is 104.42.97.x and network B is 10.10.10.x. thanks for your help.

Interface List
3…56 00 03 b7 d6 6e …Intel network internface Adapter #2
10…ce d4 2d 87 99 ze …ZeroTier Virtual Port
1…Software Loopback Interface 1

IPv4 Route Table

Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 104.42.97.1 104.42.97.32 261
0.0.0.0 0.0.0.0 25.255.255.254 10.242.51.35 10034
10.10.10.0 255.255.255.0 On-link 10.242.51.35 326
10.10.10.255 255.255.255.255 On-link 10.242.51.35 291
10.242.51.0 255.255.255.0 On-link 10.242.51.35 291
10.242.51.35 255.255.255.255 On-link 10.242.51.35 291
10.242.51.255 255.255.255.255 On-link 10.242.51.35 291
104.42.97.0 255.255.254.0 On-link 104.42.97.32 261
104.42.97.32 255.255.255.255 On-link 104.42.97.32 261
104.42.97.255 255.255.255.255 On-link 104.42.97.32 261
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
169.254.169.254 255.255.255.255 66.42.94.1 104.42.97.32 6
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 104.42.97.32 261
224.0.0.0 240.0.0.0 On-link 10.242.51.35 291
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 104.42.97.32 261
255.255.255.255 255.255.255.255 On-link 10.242.51.35 291

Persistent Routes:
Network Address Netmask Gateway Address Metric
169.254.169.254 255.255.255.255 104.42.97.1 1
0.0.0.0 0.0.0.0 104.42.97.1 Default
10.10.10.0 255.255.255.0 10.242.51.35 291

2

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.