VPN Routing question

Community Support
1

Good afternoon,

Having this issue if someone can enlighten me if this is possible to do.

I have added a zerotier network between two mikrotik devices.

HQ Network subnet is 192.168.0.0/24
HQ Network has other subnets connecting to WireGuard Setups
172.17.0.0/18 (10.10.0.0/16 on the ip address side)

Home Network is 192.168.5.0/24
routing 172.17.0.0/18 → hq zt ip

zerotier routing
10.xx.xx.xx/16 lan
192.168.0.0/24 10.xx.xx.xx hq zt ip
192.168.5.0/24 10.xx xx xx home zt ip

With this setup i can pretty much access everything on the home side which in my case crucial the 172.17.0.0/18 subnet.

Problem is i am having trouble understanding how to do the same from my ios device or windows laptop on different locations.

I connect to the zt network ok but i can only access the 0.0/24 and 5.0/24 network, can’t see the 172.17.0.0/18 network.

Any ideas?

Thank you in advance

1 Like
2

Good morning,

Anybody with ideas?

3

Never mind i figured it out

Thank you

4

Ah - that’s on my list of things to look into as I have a similar setup. What was the magic incantation you used? Adding an additional route on the Zerotier side, or something else on the Mikrotik routing table?

1 Like
5

The solution was to add your zerotier subnet in the allowed address option on your wireguard side.
When you think of it makes sense!

Hope you succeed on your project

6

Doh! I hadn’t even thought of that aspect of the configuration. I’ll go try that.

7

This topic was automatically closed after 30 days. New replies are no longer allowed.